Connect a compatible air compressor to your water system
for seasonal line blowout. A compact brass adapter
for a practical step in your RV, camper
or outdoor plumbing winterization routine.
BRASS CONSTRUCTION
AIR CONNECTION
SEASONAL MAINTENANCE
01 / PREPARE BEFORE FREEZING WEATHER
Small Adapter. A Useful Winter Prep Connection.
Water left in plumbing can freeze and damage components.
This adapter provides an air connection to help remove
residual water from compatible lines as part
of the system’s winterization procedure.
02 / MATCH THE CONNECTION TO YOUR SYSTEM
From Air Hose To Water-Line Fitting.
Use the appropriate hose-thread end and a matching
air connection to prepare compatible plumbing for blowout.
Confirm the selected adapter’s configuration before ordering.
✓ Brass body:
A compact metal fitting for seasonal maintenance.
✓ Hose-thread connection:
Compare the thread size and male or female end with your inlet.
✓ Air-side connection:
Check the fitting profile against your compressor coupler.
✓ Multiple applications:
Suitable systems may include RV, boat and outdoor water lines,
depending on compatibility.
A STRAIGHTFORWARD CONNECTION ROUTINE
Prepare. Connect. Follow Your System’s Procedure.
01 / PREPARE
Prepare The System
Shut off the water supply and drain the system
as directed by its manufacturer. Attach the matching
adapter to the designated inlet.
02 / CONNECT
Connect Regulated Air
Use a compatible air hose and regulator.
Set pressure according to the system and adapter
instructions before applying air.
03 / COMPLETE
Clear The Lines
Open outlets in the specified sequence and complete
the manufacturer’s blowout procedure.
Disconnect and depressurize before removing the adapter.
Pressure matters.
Follow the lowest permitted pressure limit among
the adapter and connected components. Blowing out supply
lines does not replace separate winterization steps
required for pumps, heaters, traps, tanks or appliances.
03 / TAKE A CLOSER LOOK AT THE HARDWARE
Brass Construction. Practical Connection Details.
The compact body brings the air fitting and water-side
connection together. Check the sealing washer,
thread engagement and fitting condition before each use.
✓ Compact format
for keeping with your seasonal maintenance supplies.
✓ Threaded water connection
selected to match your system’s inlet.
✓ Air fitting and seal
to inspect before connecting regulated air.
EXPERIENCES SHARED BY CUSTOMERS
What Customers Say
Feedback on the fitting, setup and seasonal
maintenance applications.
★★★★★
Solid Brass Quality — Outlives the Trailer
“Solid brass feels heavy-duty. Not some cheap plastic
or soft metal that'll crack. This thing will outlive
my travel trailer.”
— Ethan W.
★★★★★
No Tools Needed — Took 2 Minutes
“Hand-tightened it, hooked up the air hose,
and water was shooting out the faucets in seconds.
Couldn't be simpler!”
— Ava M.
★★★★★
Worked Great on My Boat Too
“Used it on my boat before winter storage.
Same garden hose thread fits the marine system perfectly.
Saved me a expensive plumber bill.”
— James T.
BEFORE YOU CONNECT
Frequently Asked Questions
Helpful details for your winterization setup.
What air pressure should I use?
Follow the pressure specified by your plumbing-system
manufacturer and the adapter instructions.
Never exceed the lowest rating of any connected component.
Use regulated air rather than direct,
unregulated compressor pressure.
Will it fit my RV or garden hose connection?
Compare the selected adapter’s thread size,
male or female configuration and air fitting
with your existing connections. Garden hose threads
and air-coupler profiles vary, so check compatibility
before ordering.
Does this replace all winterization steps?
No. The adapter helps connect compressed air for line blowout.
Your system may require additional procedures for pumps,
water heaters, appliances, traps and tanks.
Follow its complete winterization instructions,
including any specified RV antifreeze use.
Does blowing out the lines sanitize them?
No. Removing residual water is different from sanitizing
a drinking-water system. Follow the manufacturer’s
separate cleaning and sanitizing procedure.
What is the adapter made from?
The supplied description identifies a brass body
with rubber sealing components. Check the selected model
for its exact construction, pressure rating
and drinking-water suitability.
Is an air compressor included?
Check the selected package contents.
A compatible compressor, regulator and air hose
are needed for the described blowout process
and should not be assumed included.
BEFORE YOU FINISH YOUR ORDER
Review The Details For Your Selected Option.
Confirm the connection type and package contents,
then review the store information below.
